r03ds0003ej0400 rev.4.00 page 1 of 9 jul 03, 2012 preliminary datasheet rna51951a, b voltage detecting, system resetting ic series description rna51951a,b are semiconductor integrated circuits designed for detecting supply voltage and resetting all types of logic circuits such as cpus. they include a built-in delay circuit to provide a retardation time (200 ? s typ). they fined extensive applications, including battery checking circuit, level detecting circuit and waveform shaping circuit. features ? few external parts ? low threshold operating voltage (supply voltage to keep low-state at low supply voltage): 0.6 v (typ) at rl = 22 k ? ? wide supply voltage range: 2 v to 17 v ? wide application range ? ordering information part name package type package code package abbreviation taping abbreviation (quantity) surface treatment rna51951afph0 sop-8 pin prsp0008de-c fp h (2,500 pcs / reel) 0 (ni/pd/au) rna51951apt0 dip-8 pin prdp0008af-b p t (1,000 pcs / box) 0 (ni/pd/au) rna51951auph1 upak plzz0004ca-a up h (1,000 pcs / reel) 1 (sn-bi) RNA51951BFPH0 sop-8 pin prsp0008de-c fp h (2,500 pcs / reel) 0 (ni/pd/au) rna51951bpt0 dip-8 pin prdp0008af-b p t (1,000 pcs / box) 0 (ni/pd/au) rna51951buph1 upak plzz0004ca-a up h (1,000 pcs / reel) 1 (sn-bi) application ? reset circuit of pch, nch, cmos, microcomputer, cpu and mcu, reset of logic circuit, battery check circuit, switching circuit back-up voltage, leve l detecting circuit, waveform shapin g circuit, delay waveform generating circuit, dc/dc converter, over voltage protection circuit recommended operating condition ? supply voltage range: 2 v to 17 v r03ds0003ej0400 rev.4.00 jul 03, 2012
rna51951a, b preliminary r03ds0003ej0400 rev.4.00 page 2 of 9 jul 03, 2012 outline and article indication trace code ? rna51951a, b pin no.1 y: year code (the last digit of year) m: month code w: week code c: control code lot no. part no. r 9 5 1 a ymwc ccc sop-8 dip-8 r 9 5 1 b ymwc ccc part no. y: year code m: month code w: week code 55 19 1b r part no. 55 19 1a r 5 a 1 y w m y m wy m w y: year code m: month code w: week code upak 5 b 1 y w m
rna51951a, b preliminary r03ds0003ej0400 rev.4.00 page 3 of 9 jul 03, 2012 pin arrangement 8 5 6 7 nc nc output power-supply nc gnd nc nc 1 4 3 2 nc: no connection rna51951a, b (top view) outline: prsp0008de-c (sop-8) prdp0008af-b (dip-8) gnd output supply voltage (top view) rna51951a, b outline: plzz0004ca-a (upak) 2 3 1 block diagram 1.25 v 25 a typ gnd output ? + ? r1 r2 a: built-in load b: open collector c delay capacitor rna51951a, b supply voltage operating waveform rna51951a, b output undefined 4.25 v 0.65 v supply voltage output state h l t t td 200 s td td
rna51951a, b preliminary r03ds0003ej0400 rev.4.00 page 4 of 9 jul 03, 2012 absolute maximum ratings (ta = 25c, unless otherwise noted) item symbol ratings unit conditions supply voltage v cc 18 v output sink current isink 6 ma v cc type a (output with constant current load) output voltage v o 18 v type b (open collector output) 400 8-pin sop (prsp0008de-c) 570 8-pin dip (prdp0008af-b) power dissipation pd 640 * 1 mw upak (plzz0004ca-a) 4.4 8-pin sop (prsp0008de-c) 8.3 8-pin dip (prdp0008af-b) thermal derating k ? 6.4 mw/c upak (plzz0004ca-a) refer to the thermal derating curve. operating temperature topr ?40 to +85 c storage temperature tstg ?55 to +125 c note: 1. 15 mm ? 25 mm ? 0.7 mmt alumina ceramic board, ta ? 25c. if ta > 25c, derate by 6.4 mw/c. electrical characteristics (ta = 25c, unless otherwise noted) ? ?l? reset type item symbol min typ max unit test conditions detecting voltage v s 4.05 4.25 4.45 v hysteresis voltage ? v s 30 50 80 mv detecting voltage temperature coefficient v s / ? t ? 0.01 ? %/c ? 450 680 type a, v cc = 5v circuit current i cc ? 420 630 ? a type b, v cc = 5v delay time t pd 80 200 500 ? s output saturation voltage vsat ? 0.2 0.4 v v cc = 4v, isink = 4ma ? 0.67 0.8 r l = 2.2k ? , vsat ? 0.4v threshold operating voltage v opl ? 0.55 0.7 v r l = 100k ? , vsat ? 0.4v output leakage current i oh ? ? 30 na type b output load current i oc ?40 ?25 ?17 ? a type a, v cc = 5v, v o = 1/2 ? v cc output high voltage v oh v cc ?0.2 v cc ?0.06 ? v type a
rna51951a, b preliminary r03ds0003ej0400 rev.4.00 page 5 of 9 jul 03, 2012 typical characteristics ambient temperature ta (c) 4.34 4.22 ?40 0 ?20 20 40 80 60 100 4.24 4.26 4.28 4.30 4.32 v sh v sl detection voltage v s (v) detection voltage vs. ambient temperature supply voltage v cc (v) output voltage v out (v) 1.0 0 0 0.2 0.4 0.6 0.8 1.0 0.2 0.4 0.6 0.8 ta = 25c r l = 2.2 k r l = 22 k r l = 100 k threshold operating voltage thermal derating 0255075 85 100 150 125 ambient temperature ta (c) 900 800 700 600 500 0 100 200 300 400 power dissipation pd (mw) ambient temperature ta (c) ?40 0 ?20 20 40 80 60 100 delay time t pd ( s) 350 0 150 100 50 250 200 300 v cc = 5v 10v v cc = 15v delay time vs. ambient temperature output sink current isink (ma) output saturation voltage vsat (v) 0.3 0 02 1 3456 0.1 0.2 v cc = 5 v v cc = 15 v v cc = 10 v output load current vs. output voltage (rna51951a) output voltage v o (v) output load current i cc ( a) 0 0 4 8 12 16 ?10 ?20 ?30 ?40 output saturation voltage vs. output sink current v cc = 4 v 8-pin dip (prdp0008af-b) upak (plzz0004ca-a) 8-pin sop (prsp0008de-c)
rna51951a, b preliminary r03ds0003ej0400 rev.4.00 page 6 of 9 jul 03, 2012 ambient temperature ta (c) ?40 0 ?20 20 40 80 60 100 v cc = 5 v circuit current vs. ambient temperature (rna51951b) circuit current i cc ( a) 700 0 300 200 100 500 400 600 example of application circuit reset circuit of rna51951 r l v cc rna51951x reset logic circuit gnd gnd power- supply power- supply output figure 1 reset circuit of rna51951 notes: 1. delay time must be longer than 200 ? s, rna51953, rna51957, and rna51958 are used. 2. if the rna5195xx and the logic circuit share a comm on power source, type a (built-in load type) can be used whether a pull-up resistor is included in the logic circuit or not. 3. the logic circuit preferably should not have a pull-down resistor, but if one is present, add load resistor r l to overcome the pull-down resistor. 4. when a negative supply voltage is used, the supply voltage side of rna5195xx and the gnd side are connected to negative suppl y voltage respectively.
rna51951a, b preliminary r03ds0003ej0400 rev.4.00 page 7 of 9 jul 03, 2012 notice for use about the power supply line 1. about bypass capacitor because the ripple and the spike of the high frequency noise and the low frequency are superimposed to the power supply line, it is necessary to remove these. therefore, please install c 1 and c 2 for the low frequency and for the high frequency between the power supply line and the gnd line as shown in following figure 2. power-supply output v cc rna51951 gnd c 2 c 1 + example of ripple noise measures figure 2 example of ripple noise measures setting of output load resistance (rna51951b) high level output voltage can be set without depending on the power-supply voltage because the output terminal is an open collector type. however, please guard the following notes. 1. please set it in value (2 v to 17 v) within th e range of the power-supply voltage recommendation. moreover, please never impress the voltage of maximum ratings 18 v or more even momentarily either. 2. please set output load resi stance (pull-up resistance) r l so that the output current (output inflow current i l ) at l level may become 4 ma or less. moreover, pleas e never exceed absolute maximum rating (6 ma). v cc (2 v to 17 v) i l 4 ma 6 r l figure 3 output load resistance r l others 1. notes when ic is handled are published in our reliability handbook, and please refer it. the reliability handbook can be downloaded from our homepage (following url). http://www.renesas.com/products/ common_info/reliability/index.jsp 2. additionally, please inquire of our company when there is an uncertain point on use.
rna51951a, b preliminary r03ds0003ej0400 rev.4.00 page 8 of 9 jul 03, 2012 package dimensions a l e c 1 b 1 d e a 2 b p c x y h e z l 1 4.85 4.65 0.90 0.12 0 8 6.2 0.15 0.20 0.25 1.12 1.42 0.46 0.00 0.1 0.20 4.4 1.85 4.6 4.2 0.25 0.45 0.65 2.03 reference symbol dimension in millimeters min nom max 5.05 a 1 0.34 0.4 6.5 5.7 1.27 0.10 0.75 5 8 4 f *1 *2 *3 p m x y 1 index mark e a z b e h d p terminal cross section ( ni/pd/au plating ) c b 1 detail f a 2 a note) 1. dimensions"*1 (nom)"and"*2" do not include mold flash. 2. dimension"*3"does not include trim offset. e p-sop8-4.4x4.85-1.27 0.1g mass[typ.] ? prsp0008de-c renesas code jeita package code previous code 1 l l ( ni/pd/au plating ) 5 8 4 1 3 1 p 1 e d e b b a la e z c 0.89 2.54 1.27 0.48 0.40 7.4 10.6 15 0 2.79 2.54 2.29 0.31 0.25 0.19 1.30 0.56 0.5 e 1 l e c b p a e d b 3 z a 1 5.06 6.30 9.60 reference symbol dimension in millimeters min nom max 7.62 p-dip8-6.3x9.6-2.54 0.54g mass[typ.] dp-8fv prdp0008af-b renesas code jeita package code previous code
rna51951a, b preliminary r03ds0003ej0400 rev.4.00 page 9 of 9 jul 03, 2012 4.5 0.1 1.8 max 1.5 0.1 0.44 max 0.44 max 0.48 max 0.53 max 1.5 1.5 3.0 2.5 0.1 4.25 max 0.8 min 1 0.4 (1.5) (2.5) (0.4) (0.2) previous code plzz0004ca-a upak / upakv mass[typ.] 0.050g sc-62 renesas code jeita package code unit: mm package name upak
notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information incl uded herein. 3. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 4. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classified according to the following two quality grades: "standard" and "high quality". t he recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat t o human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you mus t check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by renesas electronics. 6. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas e lectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have s pecific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance desig n. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics produc t, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measu res. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatib ility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, in cluding without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufactu re, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this do cument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of renesas electronics products, who distributes, disposes of, or othe rwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, renesas electronics assumes no responsibility for any losses incurred by yo u or third parties as a result of unauthorized use of renesas electronics products. 11. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of renesa s electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this doc ument or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-o wned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. htt p ://www.renesas.co m refer to "htt p ://www.renesas.com/" for the latest and detailed information . r e n esas el ec tr o ni cs am e ri ca in c . 2880 scott boulevard santa clara , ca 95050-2554 , u.s.a . tel: +1-408-588-6000, fax: +1-408-588-6130 renesas electronics canada limited 1101 nicholson road, newmarket, ontario l3y 9c3, canada tel: +1-905-898-5441, fax: +1-905-898-3220 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-585-100, fax: +44-1628-585-900 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-65030, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 204, 205, azia center, no.1233 lujiazui ring rd., pudong district, shanghai 200120, china tel: +86-21-5877-1818, fax: +86-21-6887-7858 / -7898 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 1 harbourfront avenue, #06-10, keppel bay tower, singapore 098632 tel: +65-6213-0200, fax: +65-6278-8001 renesas electronics mala y sia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petalin g jaya, selan g or darul ehsan, malaysi a tel: +60-3-7955-9390 , fax: +60-3-7955-951 0 renesas electronics korea co. , ltd . 11f., samik lavied' or bld g ., 720-2 yeoksam-don g , kan g nam-ku, seoul 135-080, korea tel: +82-2-558-3737 , fax: +82-2-558-514 1 s ale s o ffi c e s ? 2012 renesas electronics corporation. all ri g hts reserved . colo p hon 2.0
|
